EFI Live Auto Cal - FAQ
EFI AUTOCAL V3 Installation Instructions
BEFORE INSTALLATION, PLEASE READ. Important: Before installing the tune file, ensure you install the patch file first. Failing to do so can corrupt the factory PCM, leading to potential issues that might require a tow to a dealership for a factory re
The EFILive Autocal Official User Guide
The EFILive Autocal Official User Guide can be found here:. > EFI LIVE Autocal User Guide
How to install your CSP5/DSP5 switch
Please choose the right option from the following links:. For Dodge Ram Cummins:. CSP5 Switch Installation. For GM Duramax:. DSP5 Switch Installation
How to install the Bypass Cable on 2018+ RAM Trucks
Please see the following link to install your bypass cable:. > Installing the Ram 2018+ bypass cable
How to Find Serial Number and Auth Code
To view License Status or generate Serial and Auth Code information for VIN License purchases:. If the serial and auth code do not pass validation, an error code will be displayed. Error code details and VIN License validation help can be found here.
MY TRUCK TURNED OFF WHILE PROGRAMMING AND NOW IT DOES NOT START/AN ERROR KEEPS APPEARING, HOW DO I FIX THIS?
If the Autocal’s programming procedure was interrupted (vehicle turned off, battery level low, etc.), this may have caused a corrupt PCM. Please ensure that a battery charger (minimum a steady 10amp charge) is connected to the vehicle while programmi
ARE MY TUNES SWITCHABLE WITHOUT INSTALLING THE CSP4/CSP5/DSP5 SWITCH?
No, the tunes within the Autocal are only switchable using the supplied CSP4/CSP5/DSP5 switch at this time.
I want to tune an Additional Truck with my EFi Live AutoCal - Additional VIN License
EFi Live AutoCal customers may purchase additional VIN licenses to tune additional ECMs. Your AutoCal is pre-configured with and ships with one VIN license. Tuner Depot can increase the maximum VIN slot limit capacity on your device, so additional VI
CSP5 Switch Installation
Plug in the switch into the device. It will start by blinking the firmware version number, a series of long and short blinks. Turn the key on and change the tune and it will blink the tune it just set. Test all the positions. If it correctly blinks t
DSP5 Switch Installation
The DSP5 switch will have two wires with pre-crimped pins. It does not matter which colored wire goes into which pin as long as you use the two pins listed below:. After you've installed the pins into the correct connector location, plug the connecto
Frequently Asked Questions
HOW MANY TUNES ARE ON MY AUTOCAL DEVICE, AND CAN I USE THE TUNE FILE ON MULTIPLE VEHICLES. There will be one tune file on your Autocal device per order. Within the tune file, there will either be 4 or 5 switchable tunes using your supplied CSP4/CSP5/
HOW MANY TUNES ARE ON MY AUTOCAL DEVICE, AND CAN I USE THE TUNE FILE ON MULTIPLE VEHICLES
There will be one tune file on your Autocal device per order. Within the tune file, there will either be 4 or 5 switchable tunes using your supplied CSP4/CSP5/DSP5 switch. Each tune created for each Autocal device sold is for one specific vehicle. Pl
WHY IS ERROR CODE $053E APPEARING ON THE AUTOCAL?
If error $053E appears while programming your vehicle, it means the VIN you have submitted with your order does not match the vehicle’s VIN that you are trying to program with your Autocal. Please ensure that the VIN you submit for your order of your